PROGRAM FIZCON VERSION 8.10 Run on 25-Oct-2011 Input File Specification------------------------JEFF312N6649_0.stan805 Check the Entire File Sum Up Tests will be Performed Fractional Difference Allowed is 0.00500 Deviant Point Check will be Omitted Consecutive Equal Value Check will be Omitted TAPE BEING PROCESSED IS NUMBERED 1 LABEL IS JEFF-3.1.2 general purpose neutron file update released Oct.2011 Check material 66-Dy-164 MAT 6649 WARNING(S) IN MAT=6649, MF= 4, MT= 2 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 9 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 14 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 19 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 24 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 29 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 34 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 39 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 44 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 49 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 54 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 59 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 64 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 69 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 74 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 79 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 84 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 89 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 94 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 99 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 104 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 109 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 114 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 119 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 124 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 129 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 134 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 139 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 144 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 149 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 154 NL= 19 SHOULD BE EVEN SEQUENCE NUMBER 159 ERROR(S) FOUND IN MAT=6649, MF= 9, MT=102 IZAP SHOULD BE SET TO 66165 SEQUENCE NUMBER 10 MT= 102 SUBSECTION 1 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 1.000000E+02 1.000000E+02 1.000000E+03 3.000000E+03 1.000000E+04 3.000000E+04 IZAP SHOULD BE SET TO 66165 SEQUENCE NUMBER 19 MT= 102 SUBSECTION 2 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 1.000000E+02 1.000000E+02 1.000000E+03 3.000000E+03 1.000000E+04 3.000000E+04 Encountered 2 errors, 31 warnings Done FIZCON