PROGRAM FIZCON VERSION 8.14 Run on 04-Mar-2014 Input File Specification------------------------n-73-Ta-180M.jeff32.stan Check the Entire File Sum Up Tests will be Performed Fractional Difference Allowed is 0.00500 Deviant Point Check will be Omitted Consecutive Equal Value Check will be Omitted TAPE BEING PROCESSED IS NUMBERED 7777 LABEL IS JEFF-3.2 Release - Neutron File March 2014 Check material 73-Ta-180M MAT 7326 WARNING(S) IN MAT=7326, MF= 3, MT= 4 Q= 7.70998E+04 MIGHT BE UNREASONABLE SEQUENCE NUMBER 1 MT= 37 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 2.146910E+07 SUMUP TEST FAILED FOR NONELASTIC (MF= 3 AND MT= 3) THE FOLLOWING MTS WERE USED IN THE SUMUP TEST - 3 4 5 11 16 17 22 24 25 28 29 32 33 34 37 41 42 44 102 103 104 105 106 107 108 111 112 115 116 117 THE SUM OF PARTIALS DIFFERED FROM THE TOTAL BY MORE THAN 0.005000 AT THE FOLLOWING POINTS ENERGY TOTAL C-SECTION (TOTAL)-(PARTIALS) DELTA 1.652819E+02 7.600758E-06 -5.185557E-07 -0.068224 ERROR(S) FOUND IN MAT=7326, MF= 9, MT= 4 THE MINIMUM INCIDENT ENERGY OF 1.00000E-05(EV) SHOULD BE 2.02294E-01(EV) FOR Q= -2.01166E-01(EV) SUM OF MULTIPLICITIES EXCEEDED UNITY BY MORE THAN 0.005000 AT THE FOLLOWING POINTS ENERGY SUMMATION 2.00000E+04 1.88366E+00 3.00000E+04 1.47226E+00 6.00000E+04 1.13849E+00 1.00000E+05 1.04630E+00 2.00000E+05 1.00675E+00 SUM OF MULTIPLICITIES EXCEEDED UNITY BY MORE THAN 0.005000 AT THE FOLLOWING POINTS ENERGY SUMMATION 6.40000E+06 1.80834E+00 6.60000E+06 1.29690E+00 6.80000E+06 1.09525E+00 MT= 25 SUBSECTION 2 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 1.208960E+07 MT= 28 SUBSECTION 2 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 6.085080E+06 MT= 32 SUBSECTION 2 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 1.075790E+07 MT= 34 SUBSECTION 2 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 1.244080E+07 MT= 41 SUBSECTION 2 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 1.299500E+07 MT= 44 SUBSECTION 2 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 1.328810E+07 MT= 104 SUBSECTION 2 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 3.848040E+06 MT= 105 SUBSECTION 2 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 4.465620E+06 MT= 106 SUBSECTION 2 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 5.526780E+06 MT= 115 SUBSECTION 2 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 1.105110E+07 MT= 116 SUBSECTION 2 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 1.167270E+07 Encountered 1 errors, 1 warnings Done FIZCON