PROGRAM FIZCON VERSION 8.14 Run on 04-Mar-2014 Input File Specification------------------------n-74-W-186.jeff32.stan Check the Entire File Sum Up Tests will be Performed Fractional Difference Allowed is 0.00500 Deviant Point Check will be Omitted Consecutive Equal Value Check will be Omitted TAPE BEING PROCESSED IS NUMBERED 7777 LABEL IS JEFF-3.2 Release - Neutron File March 2014 MT= 2 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 5.000000E+04 MT= 4 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 1.232449E+05 MT= 17 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 1.301850E+07 MT= 104 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 6.210948E+06 MT= 106 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 7.917646E+06 MT= 53 BEING PROCESSED POINTS IN PARTIAL, NOT IN TOTAL X X X X X 7.418624E+05 SUMUP TEST FAILED FOR SINGLE NEUTRON PRODUCTION (MF= 3 AND MT= 4) THE FOLLOWING MTS WERE USED IN THE SUMUP TEST - 4 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 91 THE SUM OF PARTIAL INTEGRALS DIFFERED FROM THE TOTAL INTEGRAL BY MORE THAN 0.005000 IN THE FOLLOWING INTERVALS IF SUMUP POINT TEST DID NOT FAIL, INTERPOLATION TYPES IN PARTIALS ARE DIFFERENT FROM INTERPOLATION TYPE IN TOTAL ENERGY RANGE TOTAL INTEGRAL TOTAL-PARTIALS DELTA 7.4186E+05 TO 7.5000E+05 1.19950E+04 1.27834E+02 0.010657 No problems to report Done FIZCON